FREE CLICK & COLLECT
AND ADVICE ON PRODUCTS
Any PRODUCT Questions?
CALL US 0800 800 800Full Spec
VOLTAGE - 56 V
BRUSHLESS MOTOR - Brushless
BLADE TYPE - Tri-teeth
SHAFT TYPE - Straight
SHAFT MATERIAL - Aluminum
ROTATE DIRECTION - counter clock
AUXILIARY HANDLE ADJUSTING TYPE - Quick Adjust
IP CLASS - IPX4
HARNESS - Single
BLADE DIAMETER (MM) - 300
BLADE ARBOR DIAMETER (MM) - 25.4
NO LOAD SPEED (RPM) - 4500-6000
TOOL LENGTH (MM) - 1860
TOOL WIDTH (MM) - 500
TOOL HEIGHT (MM) - 350
BATTERY PORT - Single Port
Domestic Warranty 5 Years
Professional Warranty 2 Years
BC3800E 38CM CORDLESS BRUSH CUTTER - UNIT ONLY
Description
The BC3800E gives you more options with a single tool. The 38cm line trimmer head will help to tidy up spaces your mower may not be able to reach, such as close to tree trunks, flower beds, bushes and fences, while the 30cm brush cutter will cut through dense vegetation. This tool can also be used with our rotocut, which is suitable for cutting on hard surfaces such as pavement without damage. There’s no substitute for comfort, so also provided with this set is our AP1500D double-shoulder harness, which easily clips into the solid steel drive shaft. The harness has a hip pad attached, which helps to protect you when resting the tool on your side. The line trimmer head is supplied with 2.4mm line, which feeds into the rapid reload head to allow for quick line replacement. It’s also a bump feed head, so you can simply tap the head to feed out new line during use. The brush cutter blade is high strength steel and is comprised of 3 blades with a 30cm total cutting width.
Features
THREE-SIDED BRUSH CUTTER BLADE - 30cm cutting width.
SPEED SELECTION SWITCH - Variable speed with safety lock-off for improving safety.
HARNESS POINT - For comfortable and efficient use.
EFFICIENT AND POWERFUL BRUSHLESS MOTOR - For longer running times.
ADJUSTABLE HANDLES - For greater comfort and more compact storage.
SOLID STEEL DRIVE SHAFT - Robust and very strong.
Full Spec
VOLTAGE - 56 V
BRUSHLESS MOTOR - Brushless
BLADE TYPE - Tri-teeth
SHAFT TYPE - Straight
SHAFT MATERIAL - Aluminum
ROTATE DIRECTION - counter clock
AUXILIARY HANDLE ADJUSTING TYPE - Quick Adjust
IP CLASS - IPX4
HARNESS - Single
BLADE DIAMETER (MM) - 300
BLADE ARBOR DIAMETER (MM) - 25.4
NO LOAD SPEED (RPM) - 4500-6000
TOOL LENGTH (MM) - 1860
TOOL WIDTH (MM) - 500
TOOL HEIGHT (MM) - 350
BATTERY PORT - Single Port
FREE CLICK & COLLECT
AND ADVICE ON PRODUCTS
Any PRODUCT Questions?
CALL US 01592 652262